Here are the connections and usage instructions for each component:
Connect the white tube (air tube) and the signal wire to their designated positions on the back of the main unit.
Tighten the white tube (air tube) to prevent air leakage.
Ensure that the signal wire plug makes a clicking sound, indicating a firm connection.
The power cord runs around from the back of the machine.
The plug is buckled with an anti-detachment buckle to ensure a stable connection.
The power cord can be gathered together with the white tube to avoid tripping while moving.
The air tube connection method below the electromagnetic valve needs to be cross-connected to the air outlet.
The emergency stop wire plug is reliably connected.
The plug has directionality and foolproof design; please pay attention.
The emergency stop seat can be attracted to a position on the machine that is easy to access.
The two clamps are used to fix the pressure suits for the thighs and calves, making it convenient for getting in and out of bed and positioning.
The calf restraint strap is used to prevent the calves from spreading too wide during use, which may pull the air tube. It can be adjusted as needed.
By following the above steps and precautions, ensure that the machine is connected stably and correctly to achieve the best usage effect.
At the same time, follow operational standards to protect electronic equipment, avoiding damage due to accidental falls or pulls.